Jtag Tool 4.25 Download.rar

How to Download and Use JTAG Tool 4.25 for Embedded Systems

JTAG Tool 4.25 is a free and open-source software that allows you to perform different tasks with embedded systems through the JTAG port, such as interconnection testing, in-system programming and configuring, debug and verification[^1^]. In this article, we will show you how to download and use JTAG Tool 4.25 for your projects.

Step 1: Download JTAG Tool 4.25

You can download JTAG Tool 4.25 from the SourceForge website[^1^]. The file name is jtagtools-4.25.tar.gz and it has a size of about 2.5 MB. You will need a program like 7-Zip or WinRAR to extract the file.

Step 2: Install JTAG Tool 4.25

After extracting the file, you will find a folder called jtagtools-4.25. Inside this folder, you will see a file called install.sh. This is a shell script that will install JTAG Tool 4.25 on your system. To run this script, you will need to open a terminal window and navigate to the folder where you extracted the file. Then, type the following command:

sudo ./install.sh

This will install JTAG Tool 4.25 in the /usr/local/bin directory and create a symbolic link called jtagtool in the /usr/bin directory. You may need to enter your password to complete the installation.

Step 3: Connect Your Device to the JTAG Port

Before you can use JTAG Tool 4.25, you will need to connect your device to the JTAG port of your computer or another device that supports JTAG communication. The JTAG port is usually a small connector with four or five pins that are labeled TCK, TMS, TDI, TDO and TRST (optional). You will need a cable or an adapter that matches the pinout of your device and the JTAG port.

Once you have connected your device to the JTAG port, you can use JTAG Tool 4.25 to communicate with it. To launch JTAG Tool 4.25, you can type jtagtool in a terminal window or find it in your applications menu.

Step 4: Use JTAG Tool 4.25

JTAG Tool 4.25 has a graphical user interface that allows you to perform various operations with your device. You can select the device type from a drop-down menu, configure the JTAG parameters such as frequency and voltage level, scan for devices on the JTAG chain, read and write memory locations, program flash memory, run tests and more.

You can also use JTAG Tool 4.25 from the command line by passing arguments to the jtagtool executable. For example, you can type jtagtool -h to see a list of available options and commands.

JTAG Tool 4.25 is compatible with many devices that support JTAG communication, such as microcontrollers, FPGA boards, CPLD chips and more. You can find more information about JTAG Tool 4.25 on its website[^1^] or on its documentation[^2^].

Conclusion

JTAG Tool 4.25 is a useful software for working with embedded systems through the JTAG port. It is free and open-source and easy to install and use. You can download it from SourceForge[^1^] and follow this article to get started with it. 061ffe29dd