Samsung Ml 1670 Chip Reset Rar
Samsung Ml 1670 Chip Reset Rar ===> https://ssurll.com/2tyY11
How to Reset Samsung ML 1670 Printer Chip with Firmware
If you have a Samsung ML 1670 printer, you may encounter a problem when the toner cartridge runs out of ink. The printer will stop working and display a message that says \"Replace Toner\". This is because the printer has a chip that counts the number of pages printed and prevents you from using the cartridge beyond its limit.
However, there is a way to reset the chip and continue using the cartridge until it is completely empty. You can do this by installing a firmware fix that will override the chip's counter and allow you to print as many pages as you want. This will save you money and reduce waste.
In this article, we will show you how to reset Samsung ML 1670 printer chip with firmware in a few simple steps.
Step 1: Download the Firmware Fix
The first thing you need to do is to download the firmware fix for your printer model. You can find it online by searching for \"Samsung ML 1670 chip reset rar\" or \"Reset ML-1670 ML-1675 Fix Firmware V1.02.00.04\". You should get a file with a .rar extension that contains the firmware file and a generator program.
One of the sources where you can download the firmware fix is [^1^]. You can also check [^2^] or [^3^] for more information and instructions.
Step 2: Extract the Firmware File
After downloading the firmware fix, you need to extract the .rar file using a program like WinRAR or 7-Zip. You should get a folder with two files: ML-1670_V1.02.00.04.hd and 1660generator.exe.
The first file is the firmware file that you will install on your printer. The second file is the generator program that you will use to create a serial number for your printer.
Step 3: Generate a Serial Number
Before installing the firmware file, you need to generate a serial number for your printer using the generator program. This is because the firmware file is encrypted and needs a matching serial number to work.
To generate a serial number, open the 1660generator.exe file and enter your printer model (ML-1670) and your current serial number (you can find it on a sticker at the back of your printer). Then click on \"Generate\" and copy the new serial number that appears.
Step 4: Install the Firmware File
Now that you have the firmware file and the serial number, you can install them on your printer. To do this, follow these steps:
Turn off your printer and disconnect it from your computer.
Press and hold the power button on your printer while connecting it to your computer with a USB cable.
Release the power button when you see a green light on your printer.
Your printer should be detected as a new device by your computer. If not, go to Device Manager and update the driver manually by selecting \"USB Printing Support\".
Open the folder where you extracted the firmware file and run ML-1670_V1.02.00.04.hd as administrator.
A window will pop up asking you to enter the serial number. Paste the serial number that you generated earlier and click on \"OK\".
The firmware installation will start and take a few minutes. Do not turn off your printer or disconnect it from your computer during this process.
When the installation is complete, you will see a message that says \"Download complete\". Click on \"OK\" and close the window.
Turn off your printer and disconnect it from your computer.
Turn on your printer again and wait for it to initialize.
Step 5: Enjoy Your Reset Printer
Congratulations! You have successfully reset Samsung ML 1670 printer chip with firmware. You can now use your toner cartridge until it is completely empty without worrying about replacing it or getting error messages.
You can also check the toner level by pressing and holding the power button on your printer for about 061ffe29dd